If You Read One Article About , Read This One

Why Aluminum Wheelchair Ramps is Most Versatile

For disabled people, getting around and climbing up stairs is very challenging. And so, there are lots of wheelchairs ramps that are accessible in several varied sizes or lengths to enable a person in wheelchair to get around quite easily. You can discover more about the various wheelchair ramps in this link.

Disabled individuals basically would like get around as normally as they can, but they cannot do so without assistance from other people or things. There has to be a wheelchair ramp so that they can get in and get out.

Of all the ramp styles, an aluminum handicap ramp is regarded as the most handy. A welded aluminum structure is lighter, but it is stronger as well as more durable, when compared to wood. Such wheelchair ramps may be disassembled as well as reused at various locations and can be installed in most configurations. The aluminum exterior is nearly maintenance free. It can be installed quickly and without the need for a building permit since it cannot be considered a permanent structure. Aluminum ramps happen to be the most efficient option, and do not require maintenance as well as necessitate minimal tools. A 24-inch wheelchair ramp can be set up in not more than one hour.

An aluminum ramp can be installed temporarily as well as permanently, is reconfigurable and movable. At the same time, if you are located somewhere there’s snow or salt, it is not going to damage the aluminum ramps as it would a wood ramp.

The various types of wheelchair ramps accessible allow persons with disabilities to easily maneuver steps and cross over any doorway heights. A wheelchair ramp also makes it easy to put in a wheelchair into a vehicle or to take it out.

How wheelchair ramp installation should be done
To comply with ADA standards, wheelchair ramps must have a ramp that measures one foot per inch of rise. There is no exception, aside from when there are restrictions in space. For example, steps with a full rise measuring 24 inches must have ramping that measures 24 feet. Wheelchair ramps more than 30 feet must have intermediary resting platform. Such a platform may be straight or turned. The platform should have a length of 60 inches, at least, and of the same width as its ramp. Any platform shifting direction has to be 60 in. X 60 in. on the minimum. Wheelchair ramps with over 6 inches of rise or ramps longer than 6 feet are required to be fitted with handrails. Handrails are necessary on the two sections of ramps that feature continuous switchback rails along with dogleg platforms.

If you need help with wheelchair installation, get in touch with National Ramp.

Leave a Reply

Your email address will not be published. Required fields are marked *